Collect
Contact
English
Name:
Pass:


Therefore AD-103's mould air-drying utensil obstructs the maintenance means

Work pressure :810±210Kpa,Imports and exports pressure is bad :60+40Kpa
Therefore obstruct the appearance
Examine the regulation means
It is tall with prejudice to open pressure
  Take off 49 ,Become flexible 47 ,In order to turn 48 against the hands of a clock orientation ,Shift till regular pressure
Opening pressure lets drop with prejudice
  Take off 49 ,Become flexible 47 ,In order clockwise to turn 48 ,Shift till regular pressure
The pressure falls short of greatly with prejudice
  Take off 49 ,Become flexible 43 ,In order to turn 46 against the hands of a clock orientation ,Shift till regular pressure
Pressure is with prejudice little
  Take off 49 ,Become flexible 43 ,In order clockwise to turn 46 ,Shift till regular pressure
Open pressure 、The pressure falls short of all changing
Unite the above-mentioned relevant regulation means ,Future regulation pressure
Not exhaust
  ①Examine whether the motor vehicle air feed is regular ,If abnormal ought to be overhauld the air feed system ;Regular ought to be underway the second pace 。
  ②The check shifts whether to possess impurity inner place the pressure valve ,For the impurity be able to arouse the accent pressure valve burn 。The pressure valve bakes piece taking off 49 if shiftting 、42,Take 40 、41、43、46、47、48Component invariably succeeds piece ,Bring out 45 again 、44、38、37,Finally bring out 35 ,Examine 35 whether burns ,If possesing by 34 on 35 、36Take off ,Burnish in the way of the watermill abrasive paper of 600 ,The mark polishs levelly the burn ,Then the direction of 35 is exported also relevant burnishing ,Wipe the clean spare parts afterwards completeing in immediate future puts grease and packs passablely ;Piece ought to be underway the third pace if shiftting the pressure valve not to there is the burn 。
  ③Take off 12 outlets valve ,Whether the check possess the icing up appearance ,In case having ariseed the appearance ice up ,It ought to be examineed whether 32 heating apparatus systems are regular ,If it is abnormal ,Ought to overhaul ;It is regular ,Piece it ought to be examineed whether 12 outlets valve possess particularly ,If serviceing either replaces 12 outlets valve 。The repair means is in common ②
Gas escape
  ① Examine 7 to bear whether the part of the body is become deformed either the crackle ,Replace 7 if there being this situation ;If not thering is not piece is underway the second pace
  ② Bring out whether the 12 outlets valve checks possess the impurity cushion size on ,In immediate future if checkking up neat and tidyly passablely ,In case size worn Mian replaces 12 。
  ③ Examine 12 whether to possess the burn situation ,Repair means idem 。
     Examine 35 whether to possess the burn situation ,Restoration means idem 。
     Examine 35 whether to possess the impurity cushion ,If eliminateing 。
There is accumulated water inner place the gas receiver
  Examines the desiccating agent whether year lose effectiveness long ,If possesing ought to replace the arid a thick tube-shaped 。

AD-103's mould air-drying light carefully form of utensil components

Sequence sign
Name
Figure sign
Standard
The amount to be used
1
Six jiaos of head bolts ( length )
AD103
Q150B0632
3
2
Great bed down the livestock
AD103
Q40206
3
3
Put in order smeaing the rim
AD103-103
 
1
4
Shelter plank
AD103-104
 
1
5
Six jiaos of head bolts ( brief )
 
Q150B0616
4
6
Strengthen plank
105
 
1
7
Bear part of the body
102
 
1
8
" O " mould seals airtight the ring
 
Φ25×2.4
2
9
" O " mould seals airtight the ring
 
Φ24×2.4
1
10
Spring
117
Φ 2.2
1
12
The outlet valve invariably succeeds
115
 
1
13
" O " mould seals airtight the ring
 
Φ18×2.4
1
14
The one-way valve invariably succeeds
106
 
1
15
Spring
109
Φ 0.9
1
16
Casing
110
 
3
24
Arid a thick tube-shaped
200
 
1
25
Bypass valve pedestal
319
 
1
26
" O " mould seals airtight the ring
 
Φ8×1.9
1
27
Valve
318
 
1
28
Pagoda form reed
317
 
1
29
The mould seals airtight the ring
 
 
1
Sequence sign
Name
Figure sign
Standard
The amount to be used
30
Six jiaos of Luo Sai
 
 
1
31
" O " mould seals airtight the ring
 
Φ37.5×2.1
1
32
Electricity jack
502
 
1
33
Dormant bolt
 
Q2540630
1
34
" O " mould seals airtight the ring
 
Φ20×2.4
35
Shift the pressure valve invariably to succeed
303
 
1
36
Valve
307
 
1
37
Spring pedestal
309
 
1
38
Spring
312
Φ 2.5
1
39
" O " mould seals airtight the ring
 
Φ40×3.1
1
41
Shift the pressure valve to top
301
 
1
42
The opening wards off the ring in the way of the spring
 
Q43042
1
43
Regulate nut
308
 
1
44
Be getting near by the taut spring
311
Φ 1.5
1
45
Push rod
306
 
1
46
Regulate the bolt case
305
 
1
47
Hexagonal nut
 
Q350B08
1
48
Tuner screw
316
 
1
49
Dust shield
310
 
1
50
Add up to
 
 
 

All rights reserved ©: Laizhou New Anda Auto Replacement Parts Co.,Ltd.
ADD:NO.118 yutai east roda Laizhou development POS:261400
TEL:0535-2290149 / 2172149  FAX:0535-2291149
Email: Xanda@china-anda.com